Internal Door Assembly: 5 Useful Tips for a Perfect Job

1. Accurate Measurement is the Key

The first crucial step for a smooth installation of internal doors is an accurate measurement. Make sure to measure the opening where you will install the door precisely. Measure the width, height, and depth of the opening, also considering any spaces for soundproofing or thermal insulation. Remember the fundamental rule: "Measure twice, cut once."

2. Check the Squaring of the Opening

Verify that the opening in which you will install the door is perfectly square. Use a square to ensure that the angles are at 90 degrees. If the opening is not square, you will need to make the necessary corrections before proceeding with the installation to avoid future problems.

3. Make sure you have enough space for it

Furthermore, it is essential to ensure that the door has enough space to open and close without obstacles. Measure the opening and consider the furniture or adjacent walls. Make sure the door can open fully without bumping or rubbing against other surfaces. This will ensure smooth functionality and prevent damage or premature wear. If necessary, consider installing door stops to prevent the door from hitting the walls when opened.

4. Check Horizontality and Verticality

Before permanently fixing the door, make sure it is perfectly horizontal and vertical. Use a level to check the alignment and make necessary corrections until achieving a perfect result. A door that is not level can cause problems with closing and functionality.

5. Test the Closure and Adjust if Necessary

Once installed, test the door closure. Make sure it closes effortlessly and fits perfectly into the frame. If the door does not close properly or rubs, adjust the hinges or file the edge of the door until you achieve a uniform closure.

Following these five tips during the installation of interior doors will help you avoid future problems and ensure that the end result is of high quality. Accurate work will not only improve the appearance of your home, but also contribute to its functionality and your long-term satisfaction. Always remember to work carefully and precisely to achieve the best possible result.